To Next PageTo Next Page
Need help?Do you have a question about the Makita HP457D and is the answer not in the manual?
General| Voltage | 18V |
|---|---|
| Chuck Capacity | 13 mm |
| Weight | 1.7 kg |
| Power Source | Cordless |
| Max Drilling Capacity in Steel | 13 mm |
| Max Drilling Capacity in Wood | 36 mm |
| Max Drilling Capacity in Masonry | 13 mm |
| Torque Settings | 16 + Drill |
| Max Fastening Torque (Hard) | 42 Nm |
| Type | Combi Drill |
| No Load Speed | 0-400 / 0-1, 400 RPM |
| Impact Rate | 0 - 6000 / 0 - 21000 ipm |
