Makita JS1000 User Manual

6 ENGLISH
Storing hex wrench
1
►1. Hex wrench
Storethehexwrenchasshowninthegurewhennotinuse.
OPERATION
Lubrication
1
►1. Pin
Before operation, lubricate the contact point of the center
blade and the pin. To keep good cutting performance, also
use a cutting lubricant from time to time during operation.
OPERATION
Alwaysholdthetoolrmlywithonehandonhousing.
Do not touch the metal part.
Turn the tool on and set front ends of the side blades on
the workpiece. Now simply move the tool forward, keep-
ingthesidebladesushwiththeworkpiecesurface.
NOTE:
• When cutting a small portion of the workpiece,
youmayhavedifcultycompletingtheendof
the cut. In that case, try to cut it again, pulling
the workpiece back slightly.
MAINTENANCE
CAUTION:
• Always be sure that the tool is switched off and
unplugged before attempting to perform inspec-
tion or maintenance.
• Never use gasoline, benzine, thinner, alcohol
or the like. Discoloration, deformation or cracks
may result.
To maintain product SAFETY and RELIABILITY, repairs,
anyothermaintenanceoradjustmentshouldbeper-
formed by Makita Authorized Service Centers, always
using Makita replacement parts.
OPTIONAL ACCESSORIES
CAUTION:
• These accessories or attachments are recom-
mendedforusewithyourMakitatoolspecied
in this manual. The use of any other accessories
orattachmentsmightpresentariskofinjuryto
persons. Only use accessory or attachment for
its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
• Center blade
• Side blade R
• Side blade L
• Hex wrench
• Thickness gauge
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.

Makita JS1000 Specifications

General

Brand	Makita
Model	JS1000
Category	Power Tool
Language	English