1.Double insulated
2.See the attached sheets for more information.
Superiority of chip saw blade over abrasive cut off wheel
1.Faster than abrasive cut off wheel in cutting work.
2.Fine cutting section, and saving the time for after-treatment.
Available also for cutting plastic pipe without burning of cutting section.
3.Lower frequency of blade change.
Consequency the chip saw brings you the saving for working time.
4.Few spark springs.
5.No smell of the burning materials painted on the tools, like as abrasive cut off wheels.
6.Few chips springs from the materials.
Consequently the chip saws brings you clean working plase.
7.Much more tough than abrasive cut off wheels, which shows as per the following diagram.
Feature and benefits
T.C.T Saw Blade
.
Diameter : 305mm(12")
Grip for carrying
Aluminum base
Shaft lock
Blade sready rest
.
Less noise
.
Longer life of blade
*Model LC1230 for European market is equipt with safety lock system.
Cutting angle adjustment
without any tools
.
Fence angle can be adjust
only by loosening the lever.
.
Lenght of the lever is changeable
and it can be stored in the machine,
when it is not needed.
Dust tray
.
Dismountable dust tray for
throwing away the dust.
Quick vise
.
Various size of work
can be clamped quickly.
To Next Page
Loading...
