Makita LD050P - Operations; Switching ON;OFF; Clear; Message Codes

Makita LD050P
4
en
Operations
Switching ON/OFF Clear Message Codes
2 sec
Device is
turned OFF.
1x
Undo last action.
If the info icon appears with a
number, observe the instruc-
tions in section "Message
Codes".
Example:
Adjusting measuring reference
Distance is measured from the
front of the device.
1
Distance is measured from the rear
of the device (standard setting).
2
Distance unit setting
0.000m
0.00m
0.00ft
0‘00‘‘ 1/16
0.00in
0 1/16in
Switch between the
following units:
2 sec