Need help?Do you have a question about the Makita LS1110F and is the answer not in the manual?
General| Laser guide | No |
|---|---|
| Sliding rails | - |
| Vibration level | 2.5 m/s² |
| Idle speed (max) | 4500 RPM |
| Sound power level | 102 dB |
| Cutting depth (90º) | 91 mm |
| Cutting width (90°) | 310 mm |
| Sound pressure level | 91 dB |
| Vibration level uncertainty | 1.5 m/s² |
| Input power | 1450 W |
| Cable length | 2 m |
| Power source | AC |
| Blade diameter | 260 mm |
| Saw blade included | Yes |
Weight and Dimensions| Depth | 745 mm |
|---|---|
| Width | 497 mm |
| Height | 565 mm |
| Weight | 16400 g |
Details the model, dimensions, capacities, and other technical specifications of the tool.
Explains the meaning of various symbols and the intended application of the tool.
Outlines the electrical power requirements and safety precautions for connecting the tool.
Comprehensive safety guidelines covering workspace, electrical hazards, and personal protection.
Specific instructions for safe operation, maintenance, and use of auxiliary features like the lamp.
Visual identification of all parts of the saw with corresponding labels.
Instructions for securely mounting the tool and locking the handle for safety.
How to operate the slide lock and essential information about the blade guard's function and safety.
Steps to properly position and adjust kerf boards for optimal cutting performance.
Guide to checking and adjusting the tool's maximum cutting capacity.
How to adjust the stopper arm for setting the saw blade's lower limit position.
Procedure for adjusting and setting the miter angle using positive stops.
Instructions for tilting the saw blade to the left and beyond standard range.
Specific procedure for tilting the saw blade to the right side.
How to safely operate the switch trigger and the function of the lock-off button.
How to use the LED lamp to cast a cutting line for accurate cuts.
Explanation of the tool's smooth start-up function.
Instructions on how to store the hex wrench to prevent loss.
Detailed steps for safely installing or removing the saw blade, including preparation.
Detailed steps for safely removing the circular saw blade.
How to connect a vacuum cleaner for dust collection.
Instructions for attaching and emptying the dust collection bag.
Emphasizes the importance of securing the workpiece correctly and safely.
Instructions for using guide fences and the vertical vise to secure workpieces.
How to extend and secure the sub bases for workpiece support.
Steps for performing straight cuts with the carriage locked.
Guide for performing slide cuts on wider workpieces.
Instructions and safety for performing miter and bevel cuts.
How to cut crown and cove moldings.
Process of making cuts with both miter and bevel angles simultaneously.
Guide to measuring and setting up for left bevel cuts.
Instructions and warnings for cutting aluminum extrusions.
How to set up for cutting multiple pieces of the same length.
Instructions and warnings for performing groove cuts.
Procedures for realigning and adjusting the miter and bevel angles.
Steps to adjust and align miter and bevel angle settings accurately.
Specific instructions for adjusting the 45-degree bevel angle.
How and when to replace carbon brushes for optimal tool performance.
List and warnings for recommended optional accessories.
To Next Page
