Need help?Do you have a question about the Makita LXFD01 and is the answer not in the manual?
General| Type | Cordless Drill |
|---|---|
| Voltage | 18V |
| Chuck Size | 1/2 inch |
| Max Torque (in-lbs) | 480 in-lbs |
| Battery Type | Li-ion |
Details on LXFD01 model, capacities for steel, wood, and screws.
No load speed, length, weight, voltage, and battery cartridge information.
Safety for work area (cleanliness, atmosphere) and electrical aspects (plugs, grounding).
Stay alert, use PPE, prevent unintentional starting, and avoid distractions.
Guidelines on not forcing the tool, checking switch, disconnecting power, and maintenance.
Instructions for storing idle tools and maintaining cutting tools.
Using correct charger/battery, preventing shorting, and handling battery liquid.
Service by qualified personnel, lubrication, and handle care.
Use auxiliary handles, hold insulated surfaces, maintain footing, hold firmly.
Keep hands away from moving parts, do not leave tool running, be aware of hot parts.
Read instructions, do not disassemble, stop if overheated, avoid eye contact with electrolyte.
Avoid shorting, storing with metal, exposure to water/heat, and incinerating.
Charge before discharge, stop when power is low, avoid overcharging, charge at room temperature.
Procedure for inserting and removing battery cartridges, ensuring proper lock.
How to start, stop, and control speed using the switch trigger.
Automatic power cutoff due to overload, hot cells, or low battery capacity.
Tool's electric brake stops rotation quickly after trigger release.
How to use the front lamp for illumination during operation.
Using the reversing switch to change rotation direction and neutral position.
How to change speed using the lever, ensuring correct position before operation.
Adjusting torque with the ring; clutch slips at levels 1-16, not at marking.
How to install and secure the hook for temporarily hanging the tool.
Installing the optional bit holder for storing driver bits.
Steps for screwdriving, including adjusting torque, placing bit, and starting tool.
Steps for drilling, including adjusting ring, drilling in wood, and drilling in metal.
Procedure for replacing worn carbon brushes with new ones.
List of recommended accessories and attachments for the tool.
Covers warranty period, exclusions, and limitations of liability.
Warning about chemicals in dust from construction activities and exposure reduction.
To Next Page
