Makita MP100D - Inflation and Maintenance; Using Sport Ball Needle or Tapered Adapter; Maintenance Precautions

9 ENGLISH
Using the sport ball needle or
tapered adapter
Youcaninatesmallitemssuchassportballsoroat-
ingtubes.Toinatesportballs,usethesportballnee-
dle.Toinateoatingtubes,usethetaperedadapter.
1. Unfold the air chuck clamp.
2. Attachthesportballneedleortaperedadapterto
the air chuck.
3
12
4
►1.Airchuckclamp2.Airchuck3. Sport ball needle
4.Taperedadapter
3. Foldtheairchuckclamprmly.
4. Insert the sport ball needle or tapered adapter into
the hole on the item.
5. Turnonthetool,andthensettheappropriate
pressure value using the pressure gauge.
NOTICE: When inating a oating tube, the
pressure gauge will not display an accurate value
since the pressure of oating tube is less than 20
kPa (3 PSI). When inating a oating tube, do not
use the value on the pressure gauge, but inate it
by checking the status of the oating tube.
6. Keep pulling the switch trigger until the tool stops.
Theitemisinatedwiththespeciedpressure.
MAINTENANCE
CAUTION: Always be sure that the tool is
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
NOTICE: Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
TomaintainproductSAFETYandRELIABILITY,
repairs,anyothermaintenanceoradjustmentshould
beperformedbyMakitaAuthorizedorFactoryService
Centers, always using Makita replacement parts.
MAKITA LIMITED WARRANTY
Please refer to the annexed warranty sheet for the
most current warranty terms applicable to this product.
If annexed warranty sheet is not available, refer to the
warranty details set forth at below website for your
respective country.
UnitedStatesofAmerica:www.makitatools.com
Canada: www.makita.ca
Other countries: www.makita.com