Makita MP100D User Manual

8 ENGLISH
OPERATION
Using the English valve adapter
1. Unfold the air chuck clamp.
2. Insert the English valve adapter into the air chuck.
3. Foldtheairchuckclamprmly.
12 3
4
►1. English valve adapter 2.Airchuck3.Airchuck
clamp 4. Valve stem
4. AttachtheEnglishvalveadaptertothevalvestem
while opening the English valve adapter.
5. Turnonthetool.
6. Inatethetirebypullingtheswitchtriggerwhile
checking the status of the tire.
NOTICE: When using the English valve adapter,
the pressure gauge will not display an accurate value
due to characteristics of the valve. When inating a
tire, do not use the value on the pressure gauge, but
inate it by checking the status of the tire.
If the tool stops before the tire reaches the desired air pres-
sure, adjust the pressure value, and then inate the tire again.
Using the Schrader valve adapter
1. Unfold the air chuck clamp.
2. Attachtheairchucktothevalvestem.
1
2
3
►1.Airchuckclamp2. Valve stem 3.Airchuck
3. Foldtheairchuckclamprmly.
4. Turnonthetool,andthensetthepressurevalue
appropriate for the tire using the pressure gauge.
5. Keep pulling the switch trigger until the tool stops.
Thetireisinatedwiththespeciedpressure.
Using the Presta valve adapter
1. Loosen the locking nut on the valve stem.
1
►1. Locking nut
2. Unfold the air chuck clamp.
3. AttachthePrestavalveadaptertothevalve
stem, and then attach the air chuck to the Presta valve
adapter.
21
3
4
►1. Presta valve adapter 2.Airchuck3.Airchuck
clamp 4. Valve stem
4. Foldtheairchuckclamprmly.
5. Turnonthetool,andthensetthepressurevalue
appropriate for the tire using the pressure gauge.
6. Keep pulling the switch trigger until the tool stops.
Thetireisinatedwiththespeciedpressure.
7. Remove the air chuck and Presta valve adapter,
and then tighten the locking nut.

Makita MP100D Specifications

General

Brand	Makita
Model	MP100D
Category	Power Tool
Language	English