Need help?Do you have a question about the Makita N5900B and is the answer not in the manual?
General| Input power | 2000 W |
|---|---|
| Power source | AC |
| Blade bore | 30 mm |
| Blade diameter | 235 mm |
| Idle speed (max) | 4100 RPM |
| Cutting depth (45º) | 60 mm |
| Cutting depth (90º) | 85 mm |
Weight and Dimensions| Depth | 380 mm |
|---|---|
| Width | 255 mm |
| Height | 287 mm |
| Weight | 7200 g |
Explains symbols used in the manual for tool understanding.
Describes the tool's purpose for various straight and angled cuts in wood.
Details power connection requirements and double insulation features.
Lists crucial safety precautions for operating electric tools, covering work area and personal safety.
Provides specific rules for safe tool operation, including guards, blades, and kickback prevention.
Instructions for setting and securely adjusting the cutting depth.
Steps for adjusting the tool for angled cuts.
How to align the saw for straight and angled cuts.
Explanation of how to operate the switch and lock button.
Procedure for safely changing the saw blade.
Instructions for attaching the auxiliary handle.
How to attach the joint set accessory.
Using the rip fence for accurate straight cuts.
Guide for checking and replacing worn carbon brushes.
Information about suitable saw blades for the tool.
Details on the rip fence accessory.
Mentions the offset wrench accessory.
Mentions the grip accessory.
Mentions the joint set accessory.
To Next Page
