Need help?Do you have a question about the Makita NHP1030 and is the answer not in the manual?
General| Type | Hammer Drill |
|---|---|
| Chuck Size | 10mm |
| Max. Drilling Capacity (Wood) | 25mm |
| Max. Drilling Capacity (Steel) | 10mm |
| Max. Drilling Capacity (Masonry) | 10mm |
| Power Input | 450W |
Keep work area clean, lit, and free from hazards like flammable materials.
Proper plug use, avoid grounding, use outdoor cords when necessary.
Stay alert, dress appropriately, avoid accidental starts, and use PPE.
Details on trigger operation, locking, and speed control adjustment.
How to change the rotation direction and important precautions.
Explains how to change between hammering and rotation-only modes.
Instructions for securely attaching the auxiliary side grip.
Step-by-step guide for inserting and removing drill bits using the chuck key.
How to use the depth gauge for drilling holes of uniform depth.
How to perform hammer drilling, including safety precautions and techniques.
General drilling procedures for wood, metal, and plastics, including bit selection.
To Next Page
