Need help?Do you have a question about the Makita NHP1310 and is the answer not in the manual?
General| Type | Hammer Drill |
|---|---|
| Voltage | 230V |
| Speed | Variable |
| Drilling Capacity (Steel) | 13 mm |
| Chuck Size | 13 mm |
| Impact Rate | 0-44800 bpm |
| Battery Type | Not applicable |
Provides essential safety guidelines for personal well-being while operating the tool.
Details safe practices for using and maintaining the tool to prevent accidents and damage.
Explains how to operate the switch trigger for starting, stopping, and locking the tool.
Details how to change the tool's rotation direction using the reversing switch lever.
Describes how to select between two speed ranges using the speed change lever.
Explains how to switch between hammering and rotation-only modes.
Instructions for securely attaching the auxiliary side grip to the tool.
Guides on how to insert and remove drill bits using the chuck key.
Explains how to use the depth gauge for uniform hole drilling.
Details on performing hammer drilling, including safety precautions for break-through.
Covers drilling in various materials, pressure advice, stuck bit removal, and workpiece securing.
Instructions on using the optional blow-out bulb to clean dust from drilled holes.
Outlines the terms and conditions of the one-year limited warranty for Makita tools.
To Next Page
