What to do if my Makita Saw vibrates abnormally?
If your Makita Saw vibrates abnormally, it could be due to a loose guide bar or saw chain. In this case, adjust the guide bar and saw chain tension. Another possible reason is tool malfunction.
What to do if chain does not stop even when the chain brake is engaged on my Makita Saw?
If the chain of your Makita Saw does not stop even when the chain brake is engaged, the brake band might be worn down.
Why is the chain not running on my Makita Saw?
If the chain is not running on your Makita Saw, the chain brake might be engaged. To solve this, release the chain brake.
General| Power Source | Electric |
|---|---|
| Bar Length | 14 inches |
| Weight | 10.1 lbs |
| Voltage | 120V |
| Chain Pitch | 3/8 inch |
| Amperage | 15A |
| Chain Gauge | 0.050 inch |
Guidelines for safe use of power tools related to electrical connections and grounding.
Covers alertness, PPE, preventing unintentional starting, and proper dress.
Explains kickback causes and operator precautions to avoid it.
Specifies essential PPE for safe chain saw operation, including helmets and gloves.
Guidelines for preventing electric shock, especially in wet conditions.
Checks for proper tool condition and safe operation procedures.
Practical techniques and checks to prevent kickback during operation.
How to check and adjust the saw chain tension.
Steps to verify the correct functioning of the chain brake.
Procedure to ensure the run-down brake stops the chain within a second.
How to check the oil level and oil delivery for proper lubrication.
Criteria for sharpening, sharpening angles, and techniques for maintaining sharpness.
To Next Page
