[Pulling out the retractable
lens mount]
1. While pressing in the retraction button
(A) on the camera
body
in the direction of
the
arrow,
pull
out
the lens and lens
mount
2.
When both have been pulled
out,
take
your
fingers
off the
retraction
button, and
until it clicks.
make
sure
that both have been
completely
pulled
out.
[Retracting (storing) the lens
mount]
1.
While pressing in the
retraction
button
(A) on the camera body in the direction of
2.
When the lens
mount
has been retracted
the
arrow,
push the lens
straight
in towards
in place, take your fingers off the button and
make sure that the
lens
has been securely
seated in the camera
body.
the camera
body.
The camera will not function with-
out
batteries.
1.
Remove the battery chamber cover on
the
bottom
of the camera with a
coin
or
screwdriver.
2.
“+”
is indicated on the inside of the
battery
chamber
cover.
Insert
the
two
bat-
teries,
being sure to properly place each
battery with the
“+”
side up, facing the
cover.
The New Mamiya
6
uses either two SR44
silver oxide batteries or two
LR44
alkaline
manganese
batteries.
.
1111
To Next Page
Loading...
Need help?
General
