Set the film speed of the film being used by
lining up the outer rim of the
shutter speed
dial and rotate it until the
correct
IS0 value
appears in the window.
[Opening/closing the back cover]
While depressing the back
cover
lock but-
ton,
simultaneously
push down the lock
lever in the direction of the arrow and the
back will open.
When closing the back
cover,
securely
press both corners until it clicks.
[Setting the film
type]
This camera can use either
120
or 220 film.
To
set the type of film used, simply rotate
the pressure plate in the direction of the
arrow until the white dot is at “120”
or
“220”.
When set. “120” or “220” will appear in
the small window under the memo clip.
15
To Next Page
Loading...
