[Memo clip]
The memo clip on the back
cover
is used to
hold the film box
to
serve
as a convenient
reminder of the type of film in the camera or
for recording the date.
1.
Push the spool release lever of
right
side
to the
right,
and install the
take-up
spool
in
the take-up spool chamber, then push
the
lower
spool
stud up.
2.
Like installing the take-up spool, push
the
spool release lever of
left
side
to
the
left,
place a
roll
of film in the film chamber, mak-
ing sure it seats properly. Make sure the
backing
paper is in the position illustrated
16
To Next Page
Loading...
