<Caution>
When using the Hot-shoe,
be sure to put an appropri-
ate Safety Cover over the
X-
sync terminal so that you
won’t
receive a
high voltage
electric shock if the terminal
is accidentally touched. (A
Safety Cover is put on the
X-
sync terminal when the
camera leaves the factory.)
1. When using an electronic flash,
*
Do not use a flash unit specifi-
plug the synchronization cord into
cally
dedicated for another
cam-
the Sync Terminal and set the Shutter
era. It may
damage
your 645 PRO.
Speed Dial to 1/60 sec.
or slower.
*
If you use a flash unit whose
flash duration is slower than 1/
*
The Mamiya 645 PRO has an X-
sync terminal.
Attach a shoe-mount flash to the
hot-shoe of the camera or the Left
Hand Grip GL401 (optional).
1000 sec., set the shutter speed
dial to 1/30 sec. or slower.
Flash Synchronization Chart
~~~
31
To Next Page
Loading...
