EasyManua.ls Logo

Mamiya Professional C330f - Lens and Viewfinder Accessories

Mamiya Professional C330f
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Accessories
Filters
There are five different types
of
filters
(Y2,
YG,
02,
UV,
and
SL)
for each
filter size
described
in the system chart
on page
41.
There are
two
different diameters
for the
SOmm
f/2.S and 105mm fl3.5
lenses. When you order filters for
these
lenses, always specify the
diameter of your
lens.
When using a 49mm diameter filter,
employ
the 49mm filter
for
Mamiya
C;
otherwise attaching the lens
hood might be impossible. When
you order
filters, always specify the
MAMIYA C Professional type.
To
attach a filter to a lens of 49mm
filter diameter,
place
your palm on
the protective
lens ring screwed
into the front
barrel of the lens, turn
the ring counter-clockwise to
remove
it,
and then screw
in
the
filter. When a filter
is
not used,
always replace the ring to protect
the
lens barrel.
Lens hoods
There are five different types of
lens hoods available for interchange-
able lenses.
1.
Lens hood for 55mm lens (*)
2.
Lens
hood
for
65mm lens (*)
3.
Lens hood 42mm
<I>
for
SOmm
f/2.S
(chrome type) and
105mm f/3.5
(chrome type) lenses
4.
Lens hood 4Smm
<I>
for
SOmm
fl2.S
(black type) 105mm fl3.5 0 and
135mm
fl4.5
lenses
5.
Lens hood for super 1S0mm, 1S0mm
and 250mm lenses (*)
Lens hoods marked with
an
asterisk
(*) have a side plate which can be
inclined. Attach the lens hood to
the
lens with this p!ate
up~ard.
Whel'l light reflected from the lens
hood to the viewing lens becomes
annoying
while focusing, due to a
certain
light condition, incline the
side
plate to eliminate the annoying
reflection.
All
of these lens -hoods a
re
com-
paratively new type attached only
to the taking lens. Old type lens
hoods are also acceptable.
Diopter Lens
For persons whose vision
is
not
adapted to the magnifying
glass (-
1.5
diopter) mounted on the focusing hood
as
standard equipment, five additional
types
of
lens (-
3,
-
2,0,
+1, +2 diopters)
are
available to effect diopter
correc-
tion. The magnifying glass changing
procedure
is
shown
on
page
15
.
Lens Case
To protect and easily carry inter-
changeable lenses, the following hard
cases
(4
types) are available:
(1)
Case for
55,
SO,
and 105mm
lenses
(2)
Case for
65
and 135mm lenses
(3)
Case for
1S0mm
lens
(4)
Case for 250mm lens
Soft
leather
case
The soft leather case is widely ap-
plicable
to
protect
interchangeable
lenses
for
the Mamiya C Professional
or to store accessories.
This case
also can hold lenses for
the Mamiya
Pr
ess and Mamiya
RB
.
24

Related product manuals