•
Accessories
27
Magnifying Hood
This magnifying hood may be
used instead
of
the focusing hood.
By turning the knob on the side of
this hood, either 3.5 x or 6 x magni-
fication can be
selected.
CdS Finder
This is a spot metering finder with
a
CdS exposure meter incorporated
in
the magnifying hood. Since the
meter measures
light which passes
through the
lens, the correct ex-
posure setting
is
easily obtained. A
compensating exposure factor
need
not be considered even if the
bel-
lows
is
extended. When employing
a color filter, however,
compen-
sating exposure must be made by
. considering the
filter exposure
factor. (By attaching the same
color
filter to the finder lens, such
com-
pensation
is
unnecessary.)
Grip Holder
(for Mamiya C)
The grip holder is a very con-
venient accessory for
hand-holding
the camera while taking pictures or
for
carrying the camera. Its acces-
sory shoe
is
attached on the top
of
the grip.
(for Mamiya C330 &
RB)
The camera shutter can be
released by triggering the shutter
button
of
this grip. This grip can also
be used
for
the Mamiya
RB.
Multi-angle Grip
(For Mamiya C330 and RB)
The grip-mounting angle can be
freely turned by single action; when
one's finger is removed, the grip
is
secured after each 20-degree turn.
A
trigger-type
design
is
adopted
for this grip,
interlocked with the
camera shutter
release button. It
is
equipped
with a
lock
device so that
the
trigger
cannot be depressed in-
advertently .
The accessory shoe on the grip
can be
freely turned
in
either direc-
tion and secured.
To Next Page
Loading...
