• Accessories
Single Exposure Attachment
By using the single exposure attachment provided, single
exposures can be made
of
dry plates
(2-1
/ 2 x
3-1
/ 2
in.
, 6.5
x 9cm) or cut
films (4-3/4 x
6-1
/ 2 in. cut film divided into four
1/ 4 sizes or
2-1
/ 2 x
3-1
/ 2 in.). When using 4-3/ 4 x
6-1
/ 2
in.
cut film divided into four one-quarter sizes, use a
J-type
film sheath. When using 2-1/2 x3-1/2 in. film, use
aD-type
film sheath.
Replace the camera back
cover
with the exclusive back
cover for single exposure. Always remove the
spool
in
the
camera.
Install a holder containing a dry plate
or
cut film on
the exclusive back cover to
complete
preparation. This
single exposure attachment
is
used exclusively with the
C330.
29
Paramender Model 2
This
is a
parallax-correcting
instrument
used
between
the
camera
base
and
a
tripod
Keep
the
part
attached
to
the
camera
base
downward
while
focusing
.
then
raise
the
camera
position
by
turning
the
handle
until
it
stops
just
before
releasing
the
shutter
.
Thus.
the
taking
lens
is
lifted
to
the
position
where
the
viewing
lens
was
.
and
parallax
is
hereby
automati
,
cally
cor-
rected.
Paramender Model 3
with
Pan
Head
Model
3 Para
mender
supports
the
camera
firmly
with
two
side
arms.
This
de
luxe
type
Para-
mender
also
functions
as
the
pan
head
.
To Next Page
Loading...
