5
6
Removing and Installing Injection Nozzles
32
Fig. 5
(Example)
The lubricant, which is available as a spray, must
be applied to the inside of the pressure screw, to
the threaded portion of the pressure screw and to
the nozzle holder (see shaded area).
Fig. 6
Fit fuel return line together with new sealing rings
to the nozzle holders and tighten to specified tor-
que.
Screw the pressure lines to the nozzle holders and
to the injection pump and tighten to specified tor-
que.
To Next Page
Loading...
