1
2
3
Changing oil filter
51
Fig. 1
Open oil drain plug on oil filter can (19 mm) and
use container to catch oil that may emerge. Refit
oil drain plug with new seal.
Fig. 2
Remove mounting bolt of filter bowl (17 mm).
Fig. 3
Take off filter bowl and clean it internally.
Insert new filter element and fit filter bowl with new
seals.
Observe tightening torque for mounting bolt (see
“Engineering S Data S Setting values”).
Note:
The pictures show the standard oil filter.
Classifiable engines have a filter with a
changeover feature.
However, the oil filter cartridges are changed
analogously.
3447
3448
3449
To Next Page
Loading...
