Man L27/38

Main exhaust gas constituents
approx. [% by volume] approx. [g/kWh]
Nitrogen N
2
74.0 - 76.0 5,020 - 5,160
Oxygen O
2
11.6 - 13.2 900 - 1,030
Carbon dioxide CO
2
5.2 - 5.8 560 - 620
Steam H
2
O 5.9 - 8.6 260 - 370
Inert gases Ar, Ne, He ... 0.9 75
Total > 99.75 7,000
Additional gaseous exhaust gas con-
stituents considered as pollutants
approx. [% by volume] approx. [g/kWh]
Sulphur oxides SO
X
1)
0.07 10.0
Nitrogen oxides NO
X
2)
0.07 - 0.10 8.0 - 10.0
Carbon monoxide CO
3)
0.006 - 0.011 0.4 - 0.8
Hydrocarbons HC
4)
0.01 - 0.04 0.4 - 1.2
Total < 0.25 26
Additional suspended exhaust gas
constituents, PM
5)
approx. [mg/Nm
3
] approx. [g/kWh]
operating on operating on
MGO
6)
HFO
7)
MGO
6)
HFO
7)
Soot (elemental carbon)
8)
50 50 0.3 0.3
Fuel ash 4 40 0.03 0.25
Lube oil ash 3 8 0.02 0.04
Note!
At rated power and without exhaust gas treatment.
1)
2)
3)
4)
5)
6)
7)
8)
SO
X
, according to ISO-8178 or US EPA method 6C, with a sulphur content in the fuel oil of 2.5% by weight.
NO
X
according to ISO-8178 or US EPA method 7E, total NO
X
emission calculated as NO
2
.
CO according to ISO-8178 or US EPA method 10.
HC according to ISO-8178 or US EPA method 25A.
PM according to VDI-2066, EN-13284, ISO-9096 or US EPA method 17; in-stack filtration.
Marine gas oil DM-A grade with an ash content of the fuel oil of 0.01% and an ash content of the lube oil of 1.5%.
Heavy fuel oil RM-B grade with an ash content of the fuel oil of 0.1% and an ash content of the lube oil of 4.0%.
Pure soot, without ash or any other particle-borne constituents.
MAN Diesel & Turbo
D 10 28 0
Exhaust gas components
1655210-7.3
Page 2 (2)
L23/30DF, L28/32S-DF, V28/32S, V28/32H, L28/32S, L27/38S, L23/30S, L21/31S,
L16/24S, L28/32DF, L16/24, L21/31, L23/30H, L27/38, L28/32H
2016.02.22