Man L27/38 - Page 94

ISO 8217-2012 HFO specification
Characteristic Unit Limit Category ISO-F- Test method
RMA RMB RMD RME RMG RMK
10
a
30 80 180 180 380 500 700 380 500 700
Kinematic
viscosity
at 50 °C
b
mm
2
/s Max. 10.00 30.00 80.00 180.0 180.0 380.0 500.0 700.0 380.0 500.0 700.0 ISO 3104
Density at 15 °C kg/m
3
Max. 920.0 960.0 975.0 991.0 991.0 1010.0 See 7.1
ISO 3675 or
ISO 12185
CCAI – Max. 850 860 860 860 870 870 See 6.3 a)
Sulfur
c
% (m/m) Max. Statutory requirements See 7.2
ISO 8754
ISO 14596
Flash point °C Min. 60.0 60.0 60.0 60.0 60.0 60.0 See 7.3
ISO 2719
Hydrogen sulfide mg/kg Max. 2.00 2.00 2.00 2.00 2.00 2.00 See 7.11
IP 570
Acid number
d
mg
KOH/g
Max. 2.5 2.5 2.5 2.5 2.5 2.5 ASTM D664
Total sediment
aged
% (m/m) Max. 0.10 0.10 0.10 0.10 0.10 0.10 See 7.5
ISO 10307-2
Carbon residue:
micro method
% (m/m) Max. 2.50 10.00 14.00 15.00 18.00 20.00 ISO 10370
4 (13) D010.000.023-05-0001 EN
010.000.023-05
MAN Diesel & Turbo
Specification of heavy fuel oil (HFO) D010.000.023-05-0001
General
2017-07-11 - de