M&B AED7000 - Discharging Procedure

31
The AED7000 has three energy of defibrillation（ as shown in the table below:
First energy level
150 J
Second energy level
150 J
Third energy level
200 J
Note
The charging time depends on the energy of
defibrillation.
5.7 Discharging Procedure
When the charging procedure of the AED7000 has finished, the AED7000 will
enter the discharging procedure and give voice prompts to the operator.
Note
During the discharging procedure, shock indicator,
Caution indicator and analyzing indicator will be
flickering.
WARNING!
During the discharging procedure, do not touch the
patient.
The first prompt advises to stand clear of the patient.
The operator should stand clear of the patient before pressing the shock button.
Press flashing shock button.
This prompt will be broadcast repeatedly to indicate that the AED7000 is ready to
deliver a shock.