M&R Challenger 2 - Page 18

V.033114
18 M&R Companies 1N 372 Main St. Glen Ellyn, IL 60137 USA
Tel: +630-858-6101 Fax: +630-858-6134 www.mrprint.com | store.mrprint.com
Counters
The counters menu is accessed by pressing the
Counters button on the Menu screen. The
counters menu contains six menus: Shift, Job,
Total, Preset, Remaining and Speed.
Shift Counter
Shift indicates the total number of press cycles
during a given production shift. To reset the Shift,
press the data entry cell to the right of Shift; a
numeric keypad is displayed. Enter 0, then press
Enter. Shift is reset to 0.
Job Counter
Job indicates the total number of index cycles for a
given print job. To reset the Job press the data
entry cell to the right of Job; a numeric keypad is
displayed. Enter 0, then press Enter. Job is reset
to 0.
Total Counter
The Total displays the total number of index cycles
beginning from the initial date of installation of the
equipment in your production facility. The Total is
an indication of service life and cannot be
changed.