V.033114
M&R Companies 1N 372 Main St. Glen Ellyn, IL 60137 USA 17
Tel: +630-858-6101 Fax: +630-858-6134 www.mrprint.com | store.mrprint.com
6.1.1 Operator Interface
The Operator Interface touch screen is used to
access and adjust all functions of the press.
When electrical power is turned ON to the
equipment, the M&R screen is displayed. In the
lower right is the Menu button and in the lower left
is the INFO button. The INFO menu contains
information on how to contact M&R Printing
Equipment and program information. Press the
Menu button to display the Menu screen.
The Menu screen is used to access all menus
used to adjust press functions or to display
diagnostic and test data. The Menu screen is also
used to access the Alarms menu which displays
the cause of alarm conditions.
If an Alarm condition is detected, a flashing alarm
bell is displayed in the upper right corner of all
display screens. Press the alarm bell and the
screen displays the cause of the alarm or error.
The menus on the Menu screen are Counters,
Timers, Tests, MPR Data, Options, Alarms,
Service, M&R and Menu.
Press the Menu button to return to the M&R
screen.
The Operator Interface may be set to multiple
languages. To select a language, first push in the
Emergency Stop button. Then, from the left of the
main control panel, press and hold the first and
sixth print buttons until the language screen is
displayed. Press the button for the language you
wish to use.
To Next Page
Loading...
