3-11
A = REGULATE, C = CHECK, G = GREASE, N = CLEAN,
P = BLEED, R = REPLACE, V = DRAIN
PAGE
(1)
DAILY OR
EVERY 10 HOURS
OF OPERATION
EVERY 50
HOURS
OF OPERATION
EVERY 250
HOURS
OF OPERATION
EVERY 500 HOURS
OF OPERATION
OR 6 MONTHS
EVERY 1000 HOURS
OF OPERATION
OR 1 YEAR
EVERY 2000 HOURS
OF OPERATION
OR 2 YEARS
EVERY 40000
HOURS OF
OPERATION
OCCASIONAL
ELECTRICITY
Condition of the joystick bellows
3-14 C <<< <<< <<< <<< <<< <<<
Level of electrolyte in the battery
3-15 C C <<< <<< <<< <<< <<<
Emergency pump
3-22 C C <<< <<< <<< <<<
Arm position sensors
3-25 C C <<< <<< <<< <<<
Tilt sensor
3-25 C C <<< <<< <<< <<<
Overload sensors
3-25 C C <<< <<< <<< <<<
Density of the electrolyte in the battery
3-31 C C <<< <<< <<< <<<
Condition of the cable bundles and the cables themselves
3-37 C** <<< <<<
FRONT AND REAR AXLE
Front and rear axle differential oil
3-20/3-35 C C <<< V/R <<< <<<
Front and rear axle oil
3-20/3-35 C C <<< V/R <<< <<<
Front and rear wheel reducer oil
3-20/3-35 C C <<< V/R <<< <<<
CHASSIS
Turret orientation crown
3-23 G G <<< <<< <<< <<<
Shafts
3-24 G <<< <<< <<< <<<
Tightness of the bolts fixing the axle assemblies on the chassis
3-25 C C <<< <<< <<< <<<
Tightness of the turret orientation crown bolts
3-32 C C <<< <<< <<<
LIFTING PLATFORM
General inspection
3-12 C <<< <<< <<< <<< <<< <<< <<<
Functional checks
3-12 C <<< <<< <<< <<< <<< <<< <<<
Lifting platform stickers
3-26 C <<< <<< <<< <<<
Overload
3-27 C <<< <<< <<< <<<
Stopping distance
3-27 C <<< <<< <<< <<<
Fitting slings on the lifting platform
3-42
XXX
Setting in Freewheeling mode
3-45
XXX
Transporting the lifting platform on a truck bed
3-45
XXX
Maintenance stand
3-47
XXX
OPTION
SafeManSystem
3-14 C <<< <<< <<< <<< <<< <<< <<<
(*): Every 10 hours for the first 50 hours and then a final time after 250 hours.
(**): Contact your dealer.
647414 EN (27/05/2015)
To Next Page
Loading...
