3 Any other alterations or modifications to your fork should be considered unsafe. Contact Answer
Products Technical Support prior to modifying your fork in any way for safety information.
4
Do not use any Manitou fork if any part appears to be broken, bent, cracked, or damaged.
Contact your dealer or Answer Products Technical Support, (661) 257-4411, if you have any
questions concerning the integrity
, condition, or safe operation of your fork.
5 Answer Products recommends that you periodically inspect your fork for wear and damage.
Inspect the crown, inner legs, and outer leg dropout and break arch areas for cracks or damage.
III. WARRANTY INFORMATION
Any Answer Products Manitou fork found by the factory to be defective in materials and/or work-
manship within one year from the date of purchase will be repaired or replaced at the option of the
manufacturer, free of charge, when received at the factory, freight prepaid. This warranty does
not cover breakage, bending, or damage that may result from crashes or falls. This warranty does
not cover any fork that has been modified, subject to misuse or whose serial number has been
altered, defaced or removed. This warranty does not cover paint damage. Any modifications made
by the user will render the warranty null and void. This warranty is expressly in lieu of all other
warranties, and any implied are limited in duration to the same duration as the expressed warranty
herein. Answer Products shall not be liable for any incidental or consequential damages. If for any
reason warranty work is necessary, return the fork to the place of purchase. In the USA, dealers
should call Answer Products at (661) 257-4411 for a return authorization number (RA#). Instructions
for repair, return, or replacement shall be given at that time at. Customers in countries other than
USA should contact their dealer or local distributor
. For a list of international distributors, visit our
website at www.answerproducts.com.
IV. INSTALLATION INSTRUCTIONS
Figures 1 & 2
Ensure that the proper steerer tube length has been delivered on your fork. The steerer tube may
need to be cut to length to fit your bicycle head tube. If you are not familiar with this procedure,
or do not have the proper tools to cut the steerer tube, it is recommended that you seek a dealer
with a qualified bicycle mechanic to perform installation.
Never attempt to thread a threadless steerer tube. Machining threads will weaken the steerer tube
and cause an unsafe condition. The only safe thing to do is obtain the proper crown/steerer from
your dealer.
Montaggio dell' anello della testa
FIG 1:
Installation du jeu de direction
Race installation
InstalacÛ del anillo
Einbau des Laufrings
ARANDELA DE LA DIRECCION
CONE DE JEU DE DIRECTION
GABELBR‹CKEN-LAUFRING
ANELLO DELLIA TESTA
CROWN RACE
Modelo de horquilla
Espacio libre mÌnimo
ModÈle de fourche
Modello di forcella
80mm travel forks
Spazio libero minimo
3.26" (83 mm)
Jeu minimum
FIG 2:
Minimum Tire Clearance
Gabelmodell
Fork model
Mindestabstand
Minimum clearance
MINIMUM CLEARANCE
JUE MINIMUM
ESPACIO LIBRE MINIMO
SPAZIO LIBERO MINIMO
MINDESTABSTAND
To Next Page
Loading...
