B
B
4
4 - CLEAN AND GREASE THE TELESCOPIC BOOM SHOES
Every 10 hours up to the first 50 hours and periodically every 250 hours service
- Completely extend the telescopic boom.
- Use a brush to apply a layer of grease (see “OILS - GREASES - FLUIDS - FUEL - FILTERS” table) to the 4
sides of the telescopic boom (fig. B4).
- Operate the telescopic boom several times to distribute the grease evenly.
- Remove the excess grease.
BB55 - CHECK THE BRAKE CIRCUIT FLUID LEVEL
Place the truck on a flat surface with the engine off.
- Remove the casing giving access to the braking fluid t
ank.
- The fluid must be at the tank 10 mm under the maximum level.
- If necessary, add oil through the filler orifice “1” (Fig. B5)
(see “OILS - GREASES - FLUIDS - FUEL - FILTERS” table).
In case of an abnormal drop in the level, consult your agent or
dealer.
Fig. B4
FIG. B5
1
MHT 10120 L M
Series
9
3
To Next Page
Loading...
