Grove Published 3-25-2020, Control # 643-04 5-23
GRT880 OPERATOR MANUAL MAINTENANCE AND LUBRICATION
88 Tele 1 Rollers
Figure 5-12
and
Figure 5-13
L
Apply grease to
shaft or inner
roller surfaces.
250 hours or 3 months. 1 location.
NOTE: *Lubricate items more frequently than interval in table if environmental conditions and/or operating conditions
require.
CAUTION: Do not apply excessive pressure or force when greasing wear pads. This can cause grease fitting to separate
from wear pad. Only apply grease until resistance is felt.
FIGURE 5-12
FRONT
A
B
XXXX
A
C
86
87
83
85c
84
8900-2
8900-3
To Next Page
Loading...
Need help?
General
