Manitowoc Grove YB5515-2 - Page 216

GROVE Published 1-20-2017, Control# 483-02 9-11
CD5515-2/YB5515-2 SERVICE MANUAL
9
6. Remove the three reaction pins D Figure 9-17. Inspect
for damage.
7. Carefully remove brake piston E Figure 9-18 from its
housing, if removal is necessary. A hydraulic hand pump
can be used to force the piston out of the housing.
8. Remove and discard seals F and G Figure 9-19. Inspect
the housing for damage and scoring. Nicks or cuts in the
seals may be responsible for loss of brake fluid.
Assembly
1. Install new seals F and G Figure 9-20. Make sure they
seat squarely in their grooves.
2. Carefully press piston E Figure 9-21 all the way into its
housing.
FIGURE 9-16
a0228
FIGURE 9-17
p0092
FIGURE 9-18
p0093
FIGURE 9-19
p0094
FIGURE 9-20
p0094
Reference Only