Part Number 000014141 Rev 11 12/23 37
Section 2 Installation
Refrigerant Charge
The ice machine model/serial tag lists the
refrigerant amount. Remote condensers
and line sets contain a vapor charge only.
Model Amount Type
IF0500N 6.0 lbs - 2.72 kg R404A
IT0500N 6.0 lbs - 2.72 kg R410A
IF0600N 7.0 lbs - 3.18 kg R404A
IT0750N 7.0 lbs - 3.18 kg R410A
IF0900N 7.0 lbs - 3.18 kg R404A
IT0900N 7.5 lbs - 3.40 kg R410A
IT1200N 7.5 lbs - 3.40 kg R410A
IT1500N
7.5 lbs - 3.40 kg R410A
IT1500N-A
8.0 lbs - 3.63 kg R410A
IT1500N-E
7.5 lbs - 3.40 kg
11.75 lbs - 5.30 kg
R410A
IT1900N 8.0 lbs - 3.63 kg R410A
IT1900N-A 8.0 lbs - 3.63 kg R410A
IT1900N-E
8.0 lbs - 3.63 kg
12.75 lbs - 5.78 kg
R410A
Before SN1120837623, After SN1120837623
Model/serial plate information overrides all data
listed in this chart.
Quick Connect Fittings
The ice machine and line sets come with
quick connect fittings. It is recommended
that matching quick connects (available
through Manitowoc Distributors K00129)
be installed in the multi-circuit condenser,
and that a vapor “holding” charge, 5 oz.
(150 ml), of proper refrigerant be added to
the condenser prior to connection of the
ice machine or line set to the condenser.
To Next Page
Loading...
