Manitowoc Merrychef eikon e2s - Page 133

11 Firmware
eikon e2s Service and Repair Manual UL 133
8.
Check the file information shown is correct before selecting OK.
If not, select ‘X’ and locate the correct file.
9.
When completed, select menu file to load the cooking profiles.
Once the cooking profiles are loaded the appliance restarts.
10.
Enter the date and time settings.
11.
Enter the serial number of the appliance (found on the rating plate
at the rear casing).
12.
Switch the appliance OFF/ON.
13.
Remove the USB memory stick and keep it in a safe place.