Manitowoc Merrychef eikon e2s - Replacing a Magnetron

12 Replacing components
eikon e2s Service and Repair Manual UL 151
12.5 Replacing a magnetron
Component
The magnetron(s) is/are located on top of the cavity and is/are
fixed to the cooling duct and the cavity roof.
The 2000W e2s variant comprises two magnetrons located on
the left and right hand sides of the cooling duct.
The cooling duct covers one side of the magnetron where the
magnetron is attached to the cavity roof with two screws.
The image shows a single magnetron 1000W e2s variant.