6.2 Procedure for preparing the appliance for use
Checks prior to preparing the appliance for use
Before preparing the microwave combination oven for use use the checklists below to make sure that all
important requirements are met. The appliance must not be put into operation until all the specified
requirements are met.
Checklist for moving, setting up and installing the appliance:
Cardboard packaging and transport securing devices etc. have been removed completely from the
appliance.
The appliance has no signs of damage.
The appliance has been set up so that it cannot slide about or tip over; the requirements for the
installation position and the area around the appliance have been met.
The appliance is installed in accordance with the installation regulations.
Checklist for safety devices and warnings:
All safety devices are in their designated position, are working correctly and are secured properly in
place.
All warning signs are in their designated position.
Suitable cooking utensils
Check the manufacturer’s instructions and temperature rating to determine the suitability of individual
containers or utensils using each of the cooking functions. The following chart provides general
guidelines:
Cooking utensils
Earthenware (porcelain, crockery, china, etc.)