Manitowoc Merrychef eikon e2s - Page 157

12 Replacing components
eikon e2s Service and Repair Manual UL 157
Removing the cooling fan
1.
Unplug the electrical connection of the cooling fan on the right
hand side of the appliance.
2.
Unfasten two M7 hex nuts each securing one arm of the sheet
metal bracket which holds the cooling fan.
Then turn the bracket clockwise.
3.
Twist and remove the cooling fan via the left hand side of the oven
(when looking at the oven from the front).
Fitting the cooling fan
Follow the steps in the reverse order to fit the cooling fan.
NOTICE:
If the electric connections have not been restored properly this may lead to malfunction/damage of the
oven.