Manitowoc Merrychef eikon e2s - Page 164

12 Replacing components
eikon e2s Service and Repair Manual UL 164
3.
Remove the PM (Personality Module) from the SRB and place
safely aside.
NOTICE:
Do not use tools to remove or refit the Personality Module.
Fitting the SRB
Follow the steps in the reverse order to fit the SRB.
Reconnect all electric connections to the SRB.
For details see “SRB Terminal Locations” (“Circuit diagrams” section).
1.
Ensure the thermocouple negative (-) connection (white) and positive (+) connection
(green) are fitted the correct way round or the oven temperature readings will be wrong.
2.
Refit the Personality Module (PM) removed from the old SRB to the new SRB.
Reason: Replacement QTS / SRB units come WITHOUT Personality Modules as the PMs
store individual settings saved by the user.
NOTICE:
If the electric connections have not been restored properly this may lead to malfunction/damage of the
oven.