14 Operator’s Manual
Electric Tiller/Cultivator Maintenance & Storage
STORAGE
1. Switch the product off, wait for moving parts to stop and disconnect it
from the power supply.
2. Clean the tiller/cultivator as described above.
3. Store the tiller/cultivator in a sheltered, dry, frost-free, well-ventilated
place.
4.
When not in use, the tiller/cultivator should be stored indoors in a dry
and high or locked-up place out of the reach of children.
The ideal
storage temperature is between 50°F (10°C) and 86°F (30°C).
5. We recommend using the original package for storage or covering the
tiller/cultivator with a suitable tarp or enclosure to protect it against dust.
6. You can store your tiller/cultivator with the handles in an extended
position or folded down (Figure 7). Loosening handle knobs will allow the
handles to fold down as shown.
TRANSPORTATION
1. Switch the tiller/cultivator off, wait for moving parts to stop and
disconnect it from the power supply.
2. Attach transportation guards, if applicable.
3. Always carry the
tiller/cultivator by its transportation handle.
4. Protect the
tiller/cultivator from any heavy impact or strong vibrations
which may occur during transportation in vehicles.
5. Secure the
tiller/cultivator to prevent it from slipping or falling over.
VIBRATION AND NOISE REDUCTION
To reduce the impact of noise and vibration emission, limit the time
of operation, as well as wear personal protective equipment.
Take the following points into account to minimize the vibration and
noise exposure risks:
1. Only use the tiller/cultivator as intended by its design and these
instructions.
2. Ensure that the tiller/cultivator is in good condition and well
maintained.
3. Use correct tines and ensure they are in good condition.
4. Keep tight grip on the handle grips.
5. Maintain this tiller/cultivator in accordance with these instructions
and keep tiens well lubricated.
6. Plan your work schedule to spread product use across a longer
period of time.
RESIDUAL RISKS
Even if you are operating this tiller/cultivator in accordance
with all the safety requirements, potential risks of injury and
damage remain. The following dangers can arise in connection
with the use of this product:
1. Health defects resulting from vibration emission if the product is
being used over long periods of time or not properly managed
and maintained.
2. Injuries and damage to property due to broken components or
the sudden impact of hidden objects during use.
3. Danger of injury and property damage caused by thrown objects.
This tiller/cultivator produces an electromagnetic eld during operation! This eld may under some circumstances
interfere with active or passive medical implants! To reduce the risk of serious or fatal injury, we recommend persons
with medical implants to consult their doctor and the medical implant manufacturer before operating this product!
Figure 7
To Next Page
Loading...
Need help?
General
