Need help?Do you have a question about the Mantis 7222E and is the answer not in the manual?
Highlights important safety symbols and instructions for accident prevention.
Emphasizes proper use, care, and protective gear for safe operation.
Essential guidelines for safe operation, including grip, footing, dress, and maintenance.
Lists all parts included with the Mantis Tiller for assembly.
Detailed procedure for starting the tiller when it's cold or has run dry.
Explains the procedure for safely shutting down the tiller's engine.
Describes the function of the choke in controlling engine air intake.
Highlights the safety feature where tines only engage when throttle is pressed.
Troubleshooting steps for a flooded engine, including spark plug checks.
An alternative procedure if the engine fails to start with normal methods.
How to move a running tiller to the garden area using its tines.
Safe method for carrying the tiller when the engine is off.
Guidance on transporting the tiller in a vehicle, emphasizing fuel removal.
Introduction to using the tiller, highlighting its backward tilling advantage.
Describes a specific rocking motion technique for deeper tilling.
Explains how to adjust tilling depth for different gardening needs.
Advice on using the tiller for larger garden preparation after initial tilling.
Highlights the tiller's effectiveness in weeding and its shallow cultivation depth.
Step-by-step instructions for reconfiguring the tines for cultivating.
Illustrates the correct orientation of tines for tilling.
Illustrates the correct orientation of tines for cultivating.
Guide on operating the tiller for efficient weeding and cultivation.
Explains the importance and frequency of checking and cleaning the air filter.
Detailed steps for inspecting, cleaning, and replacing the air filter.
Measures to take before storing the tiller, including fuel draining and engine run-out.
Guidance on inspecting and maintaining the spark plug for restarting.
Identifies causes and remedies for the engine not starting.
Addresses common causes and solutions for difficult engine starting.
Troubleshooting steps for an engine that misses or runs unevenly.
Detailed steps for attaching the Border Edger for shallow and deep edging.
Explains the correct technique for operating the Border Edger.
Suggests using the edger for sod cutting or mixing with tiller tines.
Exploded view and parts list for the tiller's carburetor.
Exploded views and parts lists for air cleaner, muffler, and throttle.
Exploded view and parts list for the fuel tank assembly.
Exploded view and parts list for the engine block components.
Exploded view and parts list for starter, pawl, catcher, and clutch parts.
To Next Page
General
