Mantis 3550 User Manual

4 Operator’s Manual
If the tiller/cultivator is used improperly or
safety precautions are not followed, the users
risk serious injury to themselves, others and
property. Read and understand this manual
before attempting to operate this tiller.
Moving parts will continue to run for several seconds
after turning off the tiller/cultivator. Wait until the
tines have completely stopped before lifting the tiller/
cultivator or conducting inspection and maintenance.
Some dust and debris created by the use of the tool could contain
chemicals known to the State of California to cause cancer and birth
defects or other reproductive harm. Some examples of these chemicals are:
• Chemicals in fertilizers
• Compounds in insecticides, herbicides and pesticides
• Arsenic and chromium from chemically treated lumber
Your risk from exposure to these chemicals varies, and depends on how
often you do this type of work. To reduce your exposure, work in a well-
ventilated area and with approved safety equipment, such as dust masks
that are specially designed to lter out microscopic particles.
IV. WARNINGS
1. Never allow children or people unfamiliar
with these instructions to use the tiller/
cultivator. Local regulations can restrict
the age of the operator.
2. Keep children, bystanders, and pets
away – All spectators, including pets,
should be kept a safe distance away
from the work area.
3. Keep in mind that the operator or user
is responsible for accidents or hazards
occurring to people or property.
4. Dress properly - Always wear proper
non-slip footwear and long trousers while
working. Do not operate the product
when barefoot or wearing open sandals.
Do not wear loose clothing or jewelry
as such articles can become caught in
moving parts. Wear a protective covering
to contain long hair. Wearing protective
gloves is recommended when working
outdoors. Use safety glasses and
hearing protection.
5. Thoroughly inspect the area where the
tiller/cultivator is to be used and remove
all objects which can be thrown by the
product. Thrown objects can cause
serious personal injury and property
damage. Do not allow anyone in front of
a running tiller/cultivator.
III. SAFETY DECAL INFORMATION (CONTINUED)
8
Inspect the area where the product is to be used and remove
all objects which can be thrown by the product. If objects are
hidden while operating stop the engine and remove the object.
Objects thrown by the product could hit the user or other
bystanders. Always ensure that other people and pets remain
at a safe distance from the product when it is in operation. In
general, children must not come near the area where the
product is.
Keep supply flexible cord away from cutting device.
Cutting device continues to rotate after the product is switched
off. Wait until all machine components have completely
stopped before touching the product.
Pay special attention when working on the cutting device!
Remove plug from the mains immediately if the cable is
damaged or cut.
Keep hands and feet away from sharp rotating parts – danger
of injury! When cleaning, repairing, or inspecting, make certain
the working tool and all moving parts have stopped.
Guaranteed sound power level value in 93dB.
This product is of protection class II. That means it is
equipped with enhanced or double insulation.
The product complies with the applicable European directives
and an evaluation method of conformity for these directives
was done.
Inspect the area where the tiller/cultivator is
to be used and remove all objects which can
be thrown by the tiller/cultivator. If objects are
hidden while operating stop the motor, wait for
moving parts to stop and remove the object.
8
Inspect the area where the product is to be used and remove
all objects which can be thrown by the product. If objects are
hidden while operating stop the engine and remove the object.
Objects thrown by the product could hit the user or other
bystanders. Always ensure that other people and pets remain
at a safe distance from the product when it is in operation. In
general, children must not come near the area where the
product is.
Keep supply flexible cord away from cutting device.
Cutting device continues to rotate after the product is switched
off. Wait until all machine components have completely
stopped before touching the product.
Pay special attention when working on the cutting device!
Remove plug from the mains immediately if the cable is
damaged or cut.
Keep hands and feet away from sharp rotating parts – danger
of injury! When cleaning, repairing, or inspecting, make certain
the working tool and all moving parts have stopped.
Guaranteed sound power level value in 93dB.
This product is of protection class II. That means it is
equipped with enhanced or double insulation.
The product complies with the applicable European directives
and an evaluation method of conformity for these directives
was done.
Objects thrown by the tiller/cultivator could hit
the user or other bystanders. Always ensure
that other people and pets remain at a safe
distance from the tiller/cultivator when it is in
operation. In general, children must not come
near the area where the tiller/cultivator is being
used or stored.
8
Inspect the area where the product is to be used and remove
all objects which can be thrown by the product. If objects are
hidden while operating stop the engine and remove the object.
Objects thrown by the product could hit the user or other
bystanders. Always ensure that other people and pets remain
at a safe distance from the product when it is in operation. In
general, children must not come near the area where the
product is.
Keep supply flexible cord away from cutting device.
Cutting device continues to rotate after the product is switched
off. Wait until all machine components have completely
stopped before touching the product.
Pay special attention when working on the cutting device!
Remove plug from the mains immediately if the cable is
damaged or cut.
Keep hands and feet away from sharp rotating parts – danger
of injury! When cleaning, repairing, or inspecting, make certain
the working tool and all moving parts have stopped.
Guaranteed sound power level value in 93dB.
This product is of protection class II. That means it is
equipped with enhanced or double insulation.
The product complies with the applicable European directives
and an evaluation method of conformity for these directives
was done.
Keep extension cord (not supplied) away from
cutting device.
8
Inspect the area where the product is to be used and remove
all objects which can be thrown by the product. If objects are
hidden while operating stop the engine and remove the object.
Objects thrown by the product could hit the user or other
bystanders. Always ensure that other people and pets remain
at a safe distance from the product when it is in operation. In
general, children must not come near the area where the
product is.
Keep supply flexible cord away from cutting device.
Cutting device continues to rotate after the product is switched
off. Wait until all machine components have completely
stopped before touching the product.
Pay special attention when working on the cutting device!
Remove plug from the mains immediately if the cable is
damaged or cut.
Keep hands and feet away from sharp rotating parts – danger
of injury! When cleaning, repairing, or inspecting, make certain
the working tool and all moving parts have stopped.
Guaranteed sound power level value in 93dB.
This product is of protection class II. That means it is
equipped with enhanced or double insulation.
The product complies with the applicable European directives
and an evaluation method of conformity for these directives
was done.
Tines continue to rotate after the tiller/
cultivator is switched off. Wait until all machine
components have completely stopped before
touching the tiller/cultivator.
8
Inspect the area where the product is to be used and remove
all objects which can be thrown by the product. If objects are
hidden while operating stop the engine and remove the object.
Objects thrown by the product could hit the user or other
bystanders. Always ensure that other people and pets remain
at a safe distance from the product when it is in operation. In
general, children must not come near the area where the
product is.
Keep supply flexible cord away from cutting device.
Cutting device continues to rotate after the product is switched
off. Wait until all machine components have completely
stopped before touching the product.
Pay special attention when working on the cutting device!
Remove plug from the mains immediately if the cable is
damaged or cut.
Keep hands and feet away from sharp rotating parts – danger
of injury! When cleaning, repairing, or inspecting, make certain
the working tool and all moving parts have stopped.
Guaranteed sound power level value in 93dB.
This product is of protection class II. That means it is
equipped with enhanced or double insulation.
The product complies with the applicable European directives
and an evaluation method of conformity for these directives
was done.
Pay special attention when working on the
cutting device!
8
Inspect the area where the product is to be used and remove
all objects which can be thrown by the product. If objects are
hidden while operating stop the engine and remove the object.
Objects thrown by the product could hit the user or other
bystanders. Always ensure that other people and pets remain
at a safe distance from the product when it is in operation. In
general, children must not come near the area where the
product is.
Keep supply flexible cord away from cutting device.
Cutting device continues to rotate after the product is switched
off. Wait until all machine components have completely
stopped before touching the product.
Pay special attention when working on the cutting device!
Remove plug from the mains immediately if the cable is
damaged or cut.
Keep hands and feet away from sharp rotating parts – danger
of injury! When cleaning, repairing, or inspecting, make certain
the working tool and all moving parts have stopped.
Guaranteed sound power level value in 93dB.
This product is of protection class II. That means it is
equipped with enhanced or double insulation.
The product complies with the applicable European directives
and an evaluation method of conformity for these directives
was done.
Remove plug from the mains immediately if the
cable is damaged or cut.
8
Inspect the area where the product is to be used and remove
all objects which can be thrown by the product. If objects are
hidden while operating stop the engine and remove the object.
Objects thrown by the product could hit the user or other
bystanders. Always ensure that other people and pets remain
at a safe distance from the product when it is in operation. In
general, children must not come near the area where the
product is.
Keep supply flexible cord away from cutting device.
Cutting device continues to rotate after the product is switched
off. Wait until all machine components have completely
stopped before touching the product.
Pay special attention when working on the cutting device!
Remove plug from the mains immediately if the cable is
damaged or cut.
Keep hands and feet away from sharp rotating parts – danger
of injury! When cleaning, repairing, or inspecting, make certain
the working tool and all moving parts have stopped.
Guaranteed sound power level value in 93dB.
This product is of protection class II. That means it is
equipped with enhanced or double insulation.
The product complies with the applicable European directives
and an evaluation method of conformity for these directives
was done.
Keep hands and feet away from sharp rotating
parts – danger of injury! When cleaning,
repairing, or inspecting, make certain the
working tool and all moving parts have
stopped.
8
Inspect the area where the product is to be used and remove
all objects which can be thrown by the product. If objects are
hidden while operating stop the engine and remove the object.
Objects thrown by the product could hit the user or other
bystanders. Always ensure that other people and pets remain
at a safe distance from the product when it is in operation. In
general, children must not come near the area where the
product is.
Keep supply flexible cord away from cutting device.
Cutting device continues to rotate after the product is switched
off. Wait until all machine components have completely
stopped before touching the product.
Pay special attention when working on the cutting device!
Remove plug from the mains immediately if the cable is
damaged or cut.
Keep hands and feet away from sharp rotating parts – danger
of injury! When cleaning, repairing, or inspecting, make certain
the working tool and all moving parts have stopped.
Guaranteed sound power level value in 93dB.
This product is of protection class II. That means it is
equipped with enhanced or double insulation.
The product complies with the applicable European directives
and an evaluation method of conformity for these directives
was done.
This product is of protection class II. That
means it is equipped with enhanced or double
insulation.
9
WEEE symbol. Waste electrical products should not be
disposed of with household waste. Please recycle where
facilities exist. Check with your Local Authority or local store
for recycling advice.
WEEE symbol. Waste electrical products
should not be disposed of with household
waste. Please recycle where facilities exist.
Check with your Local Authority or local store
for recycling advice.
Read the instructions carefully. Be familiar with the controls and the proper use of the product.
CAUTION!

Mantis 3550 Specifications

General

Brand	Mantis
Model	3550
Category	Tiller
Language	English