5、Learn to Ride
Start
1. Insert the key into the electric lock
hole and rotate clockwise to power it
on.
2. Check whether the switches,
instruments, horn, front and rear brakes
are working properly.
4. Before the vehicle starts: get on the
bike and sit firmly, collect the side
bracket.
3. Hold the front (rear) brake handle
and release the P-gear bike function.
5.Turn the speed control handle slowly,
inward for acceleration, outward for
stopping acceleration.
Note: You need to release the brake handle
when accelerating, otherwise it will trigger
the brake power-off function.
Warning: Acceleration must be
smooth and gentle. Do not over
operate to avoid danger or damage
to the dirt bike. Make sure first
time riders use ECO mode. And
only use SPORT mode after
becoming fully familiar with the
dirt bike.