4
、
Ride Preparation
Please ensure you have carefully read all the items in Chapter P01 (Safety
Instructions) of this manual before riding and focus on the following items.
Check the front and rear tires：
1. Tires are in good condition, with no abnormalities.
2. Normal tire pressure is 200 ∽ 220Kpa. If the tire pressure is not enough, it will be
abnormal wear, steering, low riding speed, short range; tire pressure is too high will
lead to tire tread local abnormal wear, tire adhesion is reduced, riding comfort is
reduced, and even a blowout, causing safety risks.
Check the LCD meter, horn, and brake:
1. Check whether the function display of each part of the instrument is normal.
2、Check whether the horn is working normally.
3、Hold the front, and rear brake handles respectively, and check whether the front and
rear brakes are braking normally and whether the front and rear wheels are working
normally.
Check the handlebars：
The handlebars need to be tightened without wobbling, flexible steering, no
interference, and no strange noise.
Shock absorber adjustment:
Shock absorber adjustment: Please adjust the front and rear shock absorbers to meet
your riding needs according to the actual situation.
Warning: Please make sure to wear a helmet and other protective
gear. For your safety, please choose a full-covered off-road helmet
and off-road protective equipment.
The pictures are for reference only. Please take full safety
precautions.
Please do not let other people who are not familiar with the dirt bike
(All-Terrain Bike) ride.
It is dangerous to ride with one hand or with no hand. Riding after
drinking or using drugs is extremely dangerous.
To Next Page
Loading...
Need help?
General