(1) Connect the output of the
charger to the Li-ion battery
charging port first, and then
connect the other end to the
power supply.
(2) The charger indicator flashes
red to indicate that it is charging.
When the power is full, the green
light is always on; when the
power is full, please power off in
time.
About Charging
-Charge the electric dirt bike away from children.
-Do not place any objects on the charger. Use the charger in a dry and
well-ventilated environment.
-If you smell an odor or find the temperature is too high during charging, please
stop charging immediately, or if it still does not show full for a long time, please
send it to the repair office for servicing.
Warning: Please be sure to use the authorized lithium battery
charger for this dirt bike. When replacing the charger, please use an
OEM charger.
Turn off the motor and switch before installing or removing the
battery. Plugging in with the electricity on will affect the life of the
battery.
There is a risk of ignition when the battery plug is not inserted with
the switch open, which can easily lead to damage to the plug or
battery.
To Next Page
Loading...
Need help?
General