Desired sound does not come out
No sound comes out of a specific speaker.
0
Check that speaker cables are properly connected. (v p. 17)
0
Press the OPTION button and use “Trim” on the option menu to adjust the left/right volume balance. (v p. 43)
The left and right of stereo sound is reversed.
0
Check whether the left and right speakers are connected to the correct speaker terminals. (v p. 17)
The settings of the “Bass”, “Treble” and “Trim” are not applied.
0
Press the DIRECT button to turn off source direct mode. (v p. 44)
Sound is not correctly output from the power amplifier connected to the PREAMP OUT connectors.
0
Check the power amplifier connections. (v p. 24)
Sound is not correctly output from the pre amplifier connected to the POWER AMP IN connectors.
0
Check the pre amplifier connections. (v p. 24)
0
Check the the input source of this unit is set to “Power Amp Balanced” or “Power Amp Unbalanced”. (v p. 41)
Contents
Connections Playback Settings Tips Appendix
65
Front/Top
panel
Rear panel
Remote control
unit
Index
To Next Page
Loading...
