Marantz AV 10 - Page 224

o
Bi-Amp
When “Assign Mode” is “13.1ch (Bi-Amp)”, the PRE OUT connector
used for the bi-amp connection of the front speakers is displayed.
Depending on the settings of “Floor” and “Height” - “Layout”, the
connector is determined automatically.
HEIGHT 3:
The HEIGHT 3 PRE OUT connector is
used for the bi-amp connection of the
front speakers.
FRONT WIDE:
The FRONT WIDE PRE OUT connector
is used for the bi-amp connection of the
front speakers.
SURROUND BACK:
The SURROUND BACK PRE OUT
connector is used for the bi-amp
connection of the front speakers.
o
Front B
When “Assign Mode” is “13.1ch + Front B”, the PRE OUT connector
used for the second front speakers is displayed. Depending on the
settings of “Floor” and “Height” - “Layout”, the connector is determined
automatically.
HEIGHT 3:
The HEIGHT 3 PRE OUT connector is
used for the second front speakers.
FRONT WIDE:
The FRONT WIDE PRE OUT connector
is used for the second front speakers.
SURROUND BACK:
The SURROUND BACK PRE OUT
connector is used for the second front
speakers.
Contents Connections Playback Settings Tips Appendix
224
Front panel Display Rear panel Remote Index