o
Subwoofer Output
Selects which low frequency signals are sent to the subwoofer outputs.
LFE
(Default):
When “2ch Playback” - “Front” is set to
“Large”, only LFE signals are output from
the subwoofer. Also, when “2ch
Playback” - “Front” is set to “Small”, the
front channel low range signals are
added to the LFE signals and output from
the subwoofer.
LFE + Main:
The front channel low range signal is
added to the LFE signal output from the
subwoofer.
0
This can be set when “2ch Playback” - “Subwoofer” is set to “Yes”.
o
Crossover
Set the maximum frequency of the bass signal output from each
channel to the subwoofer.
40 Hz / 60 Hz / 80 Hz / 90 Hz / 100 Hz / 110 Hz / 120 Hz / 150 Hz /
180 Hz / 200 Hz / 250 Hz (Default: 80 Hz)
0
This can be set when “2ch Playback” - “Subwoofer” is set to “Yes”.
0
When “2ch Playback” - “Front” is set to “Large” and “Subwoofer Output” is set
to “LFE”, “Full Band” is displayed and this cannot be set.
o
LFE Distribution
Adjusts the amount of LFE signal sent to the large front speakers.
Off
(Default):
Front Speakers do not play LFE signals.
–20 dB – 0 dB
Adjusts the amount of LFE signal sent to
the front speakers
0
This setting cannot be set when “2ch Playback” - “Front” is set to “Small”.
Contents Connections Playback Settings Tips Appendix
240
Front panel Display Rear panel Remote Index
To Next Page
Loading...
