o
Example layout when using height speakers
This 7.1-channel surround system is the same as a basic 5.1-channel
system but with front height speakers.
For each speaker connection, refer to “Connecting a power
amp” (v p. 43).
0
Set “Floor” to “5ch” and “Height Sp” (or “Dolby Sp”) to “2ch” in the menu when
connecting in this configuration. (v p. 216)
0
You can change the Front Height Speakers to any Height/Ceiling/Dolby Atmos
Enabled speakers in the “Amp Assign” - “Layout” setting. (v p. 218)
Contents
Connections Playback Settings Tips Appendix
52
Front panel Display Rear panel Remote Index
To Next Page
Loading...
