Marantz CD6006 - No Sound or Distorted Sound Solutions; Sound Interruption or Noise Fixes; Low Headphone Volume Solutions

o
No sound comes out
Symptom Cause / Solution Page
No sound is produced. Or
sound is distorted.
0
Check the connections for all devices. 17
0
Insert connection cables all the way in. －
0
Check that input connectors and output connectors are not reversely connected. －
0
Check cables for damage. －
0
Check the amplifier’s functions and controls and adjust as necessary. －
0
When connecting to a device with digital audio input connectors, set “Digital Out” to “On”.
45
o
Sound is interrupted or noise occurs
Symptom Cause / Solution Page
During playback from the
USB memory device,
sound is occasionally
interrupted.
0
When the transfer speed of the USB memory device is slow, sound may occasionally be interrupted. －
o
Desired sound does not come out
Symptom Cause / Solution Page
Headphone volume is low.
0
Switch “H/P AMP Gain” to “MIDDLE” or “HIGH” if using headphones with high impedance or low
sensitivity.
45
Contents Connections Playback Settings Tips Appendix
52
Front panel Display Rear panel Remote Index