o
Front B
When “Amp Assign” is “5.1ch + Front B”, the speaker terminal used for
the second front speakers is displayed. The terminal is fixed to
“SURROUND BACK”.
SURROUND BACK:
The SURROUND BACK speaker
terminal is used for the second front
speakers.
o
ZONE2
When “Amp Assign” is “5.1ch + ZONE2”, the speaker terminal used for
the ZONE2 speakers is displayed. The terminal is fixed to
“SURROUND BACK”.
SURROUND BACK:
The SURROUND BACK speaker
terminal is used for the ZONE2 speakers.
o
View Terminal Config.
This shows how to connect the speaker terminals and PRE OUT
connectors for your “Speaker Layout” setting on the menu screen.
Distances
Set distance from listening position to speakers.
Measure beforehand the distance from the listening position to each
speaker.
o
Unit
Set the unit of distance.
Feet (Default)
Meters
o
Step
Set the minimum variable width of the distance.
1 ft / 0.1 ft (Default: 1 ft)
0.1 m / 0.01 m
Contents Connections Playback Settings Tips Appendix
197
Front panel Display Rear panel Remote Index
To Next Page
Loading...
