n
Connection
Select the output terminals for audio from the speakers.
Spkr + Pre-out
(Default):
Speaker and pre-out outputs are active.
Pre-out Only:
Pre-out outputs are active. Speaker
outputs are disconnected for enhanced
audio quality using only the pre-out
terminals.
0
When “Amp Assign” is set to “Preamplifier”, the “Connection” setting of all
speakers will be fixed as “Pre-out Only”.
o
Subwoofer
Set the presence of a subwoofer.
Yes
(Default):
Use a subwoofer.
No:
Select when a subwoofer is not
connected.
o
Bi-Amp
When “Amp Assign” is “5.1ch (Bi-Amp)”, the speaker terminal used for
the bi-amp connection of the front speakers is displayed. The terminal
is fixed to “SURROUND BACK”.
SURROUND BACK:
The SURROUND BACK speaker
terminal is used for the bi-amp
connection of the front speakers.
Contents Connections Playback Settings Tips Appendix
196
Front panel Display Rear panel Remote Index
To Next Page
Loading...
